Rans Engineering & Chemicals Private Limited

Overview: 
RANSAPPHM100 is a polymeric waterproofing membrane consisting of five layers. The Centre core consists of 100 micron High Molecular High Density Polyethylene Film. The Polyethylene Film is the reinforcement barrier against water and moisture. The Centre Core is provided on both sides with SBS/APP polymer modified bitumen with properties of high Softening point, Heat resistance and high Penetration making it ideal for waterproofing purposes. The polymer modified bitumen is protected on both side with thermo fusible High Molecular High Density Polyethylene Film. The polymeric membrane has elongation exceeding 300% to absorb all Structural movements. It has a very high tensile strength and cold resistivity to adapt to all contours. 

Properties

• Excellent resistance to positive water & vapor pressure.
• Good heat resistance.
• Good dimensional stability under tension.
• Can accommodate structural movements because of excellent flexibility.
• High puncture and fatigue resistance.
• High tensile and tear strengths.
• Resistant to water borne chemicals.

Areas Of Use
RANSAPP-HM100is used as a waterproofingmembrane on the following structures    

• Inverted Roofs & parapets
• Terraces, balconies & patios
• Sunken slabs
• Bridges & tunnels
• Airport aprons & ramp areas

RANSAPPHM100in tropical regions can also be used for waterproofing of below ground concrete structures like:

• Concrete foundations & footings
• Basements
• Pile heads
• Swimming pools & water retaining structures

Application of Waterproofing system are follows:

• Surface Preparation
• Priming
• Alignment
• Torching
• Sealing

Health & Safety Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

Thickness

• 2MM  (1Mx10M), Weight  2.8 Kg3.0 Kg
• 3MM  (1Mx1M), Weight  3.8 Kg4.0 Kg
• 4MM  (1Mx10M), Weight  4.8 Kg5.0 Kg

Store in a clean dry area protected from direct sunlight and extreme heat and cold.Unopened condition rolls can be stored for 12 months. Use oldest material first.

Overview: 
RANSFELT-HF consists of a continuous sheet of Hessian base treated with Bitumen. The coatant i.e. the mixture of Bitumen as specified by I.S. specifications is uniformly applied. The resultant Coated Felt shall be given a superficial application of mineral powder to prevent the layer of the coated felt sticking together in the roll. This also gives useful protection against the effects of the sun and when laid on roofs, does not need further treatment.

Properties

• Excellent resistance to positive water & vapor pressure.
• Good heat resistance.
• Good dimensional stability under tension.
• Can accommodate structural movements because of excellent flexibility.
• High puncture and fatigue resistance.
• High tensile and tear strengths.
• Resistant to water borne chemicals.

Areas Of Use

RANSFELT-HF is used as a waterproofing membrane on the following structures:

• Inverted Roofs & parapets
• Terraces, balconies & patios
• Sunken slabs
• Bridges & tunnels
• Airport aprons & ramp areas

Grades:

Type 3 Grade I – 1M x 20M (46 Kgs.)

Type 3 Grade II – 1M x 10M (35 Kgs.)

Health & Safety: Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

Packaging & Storage

• RANSFELT-HFis packaged in (20.00 Mtr L x 1.00 Mtr W) as per given details:- 
• Weight Available: – 25 Kgs, 30 Kgs, 35 Kgs, 40 Kgs & 46 Kgs.

Store in a clean dry area protected from direct sunlight and extreme heat and cold.Unopened condition rolls can be stored for 12 months. Use oldest material first.

Additional Information:

• Item Code: RECPL-401
• Production Capacity: 400 ROLLS PER DAY
• Delivery Time: WITHIN 7 DAYS
• Packaging Details: 1MX20M PREPACKED ROLL

Overview: 
RANSFELTFG consists Glass Fibre Tissue resin bonded mat is treated/coated with bitumen. The coatant i.e. the mixture of bitumen and inert fillers as specified by IS specifications is uniformly applied. The resultant coated felt shall be given superficial application of mineral powder/mica to prevent the layer of the coated felt sticking together in the roll. This also gives useful protection against the effects of the sun and when laid on roofs does not need further treatment.

Properties

• Excellent resistance to positive water & vapor pressure.
• Good heat resistance.
• Good dimensional stability under tension.
• Can accommodate structural movements because of excellent flexibility.
• High puncture and fatigue resistance.
• High tensile and tear strengths.

Areas Of Use

RANSFELT-FGis used as a waterproofingmembrane on the following structures:

• Inverted Roofs & parapets
• Terraces, balconies & patios
• Sunken slabs
• Bridges & tunnels
• Airport aprons & ramp areas

Grades:

• Grade I 1M x 20M (36 Kgs.)
• Grade II 1M x 10M (25 Kgs.)

Health & Safety: 
Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

Packaging & Storage:

• Store in a clean dry area protected from direct sunlight and extreme heat and cold.Unopened condition rolls can be stored for 12 months. Use oldest material first.

Overview: 
RANSAPP-SELF is a cold applied self-adhesive sheet membrane comprising of a SBS/Polymer modified bitumen layer bonded on to an outer surface of cross laminated polyethylene film of 200 Microns. The SBS/Polymer bitumen adhesive layer is protected on the underside by a silicone release paper which is removed just prior to the application of RANSAPP-SELF to the tack coat primed substrate.

Properties

• Cold applied, self-adhesive and easy to apply.
• High elongation, flexibility &Fast application.
• High tensile strength, tear and puncture resistance.
• Capable of withstanding thermal movements.
• Does not undergo early aging and hence is a highly durable membrane if laid properly as per specification.
• No flame hazard and environment friendly.
• Good adhesion to primed concrete substrates.

Areas Of Use:
It is used as a cold applied waterproofing / damp proofing membrane in horizontal and vertical applications for protection of various substrates like concrete, masonry, Gl, Aluminium, wood etc. in wide range of uses: 

• Can be laid on any type Gl. Aluminium and asbestos corrugated sheets due to stick on application.
• Medium to large roof slabs (domestic, commercial and industrial)
• Basements and raft slabs
• Roof Gardens where resistance to root is not required.
• External application for cut & cover tunnels.

Health & Safety: 
Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

Packaging & Storage: 
Store in a clean dry area protected from direct sunlight and extreme heat and cold.Unopened condition rolls can be stored for 12 months. Use oldest material first.

Overview: 
RANSAPP-MIN/GT Membrane is a plastomeric waterproofing membrane consisting of five layers manufactured from a rich mixture of bitumen and selected polymers (Atactic Poly Propylene) blended together to obtain excellent heat & UV resistance and waterproofing properties.

Properties

• Excellent resistance to positive water & vapor pressure.
• Good heat resistance.
• Good dimensional stability under tension.
• Can accommodate structural movements because of excellent flexibility.
• High puncture and fatigue resistance.
• High tensile and tear strengths.

Areas Of Use
RANSAPP-MIN/GT is used as a waterproofingmembrane on the following structures:

• Inverted Roofs & parapets
• Terraces, balconies & patios
• Sunken slabs
• Bridges & tunnels
• Airport aprons & ramp areas

RANSAPP-MIN/GTin tropical regions can also beused for waterproofing of below ground concrete structures:

• Concrete foundations & footings
• Basements
• Pile heads
• Swimming pools & water retaining structures

Health & Safety: Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

Packaging & Storage: RANSAPP-MIN/GTis packaged in (10.00 Mtr L x 1.00 Mtr W) as per given details:-

Thickness:

• 2MM – (1Mx10M), Weight – 3.8 Kg-4.0 Kg
• 3MM – (1Mx1M), Weight – 4.8 Kg-5.0 Kg
• 4MM – (1Mx10M), Weight – 5.8 Kg-6.0 Kg

Store in a clean dry area protected from direct sunlight and extreme heat and cold.Unopened condition rolls can be stored for 12 months. Use oldest material first.

Additional Information:

• Item Code: RECPL-208

Overview: 
RANSAPP-GF234 is a plastomeric waterproofing membrane consisting of five layers manufactured from a rich mixture of bitumen and selected polymers (Atactic Poly Propylene) blended together to obtain excellent heat & UV resistance and waterproofing properties. The polymerized bitumen is coated on to a dimensionally stable reinforcement core of 45-50 GSM Glass-Fiber Reinforced. The membrane has excellent mechanical properties and is highly resistant to fatigue and is designed for use in structures exposed to high temperatures. 

Properties

• Excellent resistance to positive water & vapor pressure.
• Good heat resistance.
• Good dimensional stability under tension.
• Can accommodate structural movements because of excellent flexibility.
• High puncture and fatigue resistance.
• High tensile and tear strengths.
• Resistant to water borne chemicals.

Areas Of Use
RANSAPPP234 is used as a waterproofingmembrane on the following structures:

• Inverted Roofs & parapets
• Terraces, balconies & patios
• Sunken slabs
• Bridges & tunnels
• Airport aprons & ramp areas

RANSAPPP234 in tropical regions can also beused for waterproofing of below ground concrete structures like:

• Concrete foundations & footings
• Basements
• Pile heads
• Swimming pools & water retaining structures

Application of Waterproofing system are follows:

• Surface Preparation
• Priming
• Alignment
• Torching
• Sealing

Health & Safety Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

Thickness

• 2MM  (1Mx10M), Weight 2.8 Kg3.0 Kg
• 3MM  (1Mx1M), Weight 3.8 Kg4.0 Kg
• 4MM  (1Mx10M), Weight  4.8 Kg5.0 Kg

Store in a clean dry area protected from direct sunlight and extreme heat and cold.Unopened condition rolls can be stored for 12 months. Use oldest material first.

RANSAPP-MIN 5mm with minerals Membrane is a plastomeric waterproofing membrane consisting of five layers manufactured from a rich mixture of bitumen and selected polymers (Atactic Poly Propylene) blended together to obtain excellent heat & UV resistance and waterproofing properties. The polymerized bitumen is coated on to a dimensionally stable reinforcement core of 160 GSM non-woven spun bond polyester rot-proof fabric/Non-Woven Polyester Mat or 45gsm Glass-Fiber Reinforced. The membrane has excellent mechanical properties and is highly resistant to fatigue and is designed for use in structures exposed to high temperatures.

Additional Information:

• Production Capacity: 300 Rolls/Day
• Delivery Time: Within 2 Days
• Packaging Details: 1Mx10M

Overview: 
RANSAPP-P234 Membrane is a plastomeric waterproofing membrane consisting of five layers manufactured from a rich mixture of bitumen and selected polymers (Atactic Poly Propylene) blended together to obtain excellent heat & UV resistance and waterproofing properties. The polymerized bitumen is coated on to a dimensionally stable reinforcement core of 160-180 GSM non-woven spun bond polyester rot-proof fabric/Non-Woven Polyester Mat.

Properties:

• Excellent resistance to positive water & vapor pressure.
• Good heat resistance.
• Good dimensional stability under tension.
• Can accommodate structural movements because of excellent flexibility.
• High puncture and fatigue resistance.
• High tensile and tear strengths.
• Resistant to water borne chemicals.

Areas Of Use
RANSAPP-P234 is used as a water proofing membrane on the following structures:

• Inverted Roofs & parapets
• Terraces, balconies & patios
• Sunken slabs
• Bridges & tunnels
• Airport aprons & ramp areas

RANSAPP-P234 in tropical regions can also be used for waterproofing of below ground concrete structures like:

• Concrete foundations & footings
• Basements
• Pile heads
• Swimming pools & water retaining structures

Health & Safety: Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

Application of Waterproofing system are follows:

• Surface Preparation
• Priming
• Alignment
• Torching
• Sealing

Packaging & Storage

RANSAPP-P234 is packaged in (10.00 Mtr L x 1.00 Mtr W) as per given details:-

Thickness:

2MM  (1Mx10M), Weight  2.8 Kg-3.0 Kg

3MM  (1Mx1M), Weight  3.8 Kg-4.0 Kg

4MM  (1Mx10M), Weight  4.8 Kg-5.0 Kg

Store in a clean dry area protected from direct sunlight and extreme heat and cold. Unopened condition rolls can be stored for 12 months. Use oldest material first.

Overview: -
RANSPOLY-FELT is a polymeric waterproofing membrane consisting of five layers. The Centre core consists of 20 micron High Molecular High Density Polyethylene Film.  The Polyethylene Film is the reinforcement barrier against water and moisture. The Centre Core is provided on both sides with APP polymer modified bitumen with properties of high Softening point, Heat resistance and high Penetration making it ideal for waterproofing purposes.

Properties

• Excellent resistance to positive water & vapor pressure.
• Good heat resistance.
• Good dimensional stability under tension.
• Can accommodate structural movements because of excellent flexibility.
• High puncture and fatigue resistance.
• High tensile and tear strengths.
• Resistant to water borne chemicals.

Areas Of Use

RANSPOLY-FELT is used as a waterproofing membrane on the following structures:

• Inverted Roofs & parapets
• Terraces, balconies & patios
• Sunken slabs
• Bridges & tunnels
• Airport aprons & ramp areas

RANSPOLY-FELT in tropical regions can also be used for waterproofing of below ground concrete structures like:

• Concrete foundations & footings
• Basements
• Pile heads
• Swimming pools & water retaining structures even after cleaning

Health & Safety: Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

Packaging & Storage: RANSPOLY-FELT is packaged in (20.00 Mtr L x 1.00 Mtr W) as per given details:-


Store in a clean dry area protected from direct sunlight and extreme heat and cold.Unopened condition rolls can be stored for 12 months. Use oldest material first.

Overview: 
RANSAPP-AL Membrane is a plastomeric waterproofing membrane consisting of five layers manufactured from a rich mixture of bitumen and selected polymers (Atactic Poly Propylene) blended together to obtain excellent heat & UV resistance and waterproofing properties. The polymerized bitumen is coated on to a dimensionally stable reinforcement core of 160-180 GSM non-woven spun bond polyester rot-proof fabric/Non-Woven Polyester Mat or 45gsm Glass-Fiber Reinforced. The membrane has excellent mechanical properties and is highly resistant to fatigue and is designed for use in structures exposed to high temperatures. 

Properties

• Excellent resistance to positive water & vapor pressure.
• Good heat resistance.
• Good dimensional stability under tension.
• Can accommodate structural movements because of excellent flexibility.
• High puncture and fatigue resistance.
• High tensile and tear strengths.
• Resistant to water borne chemicals.

Packaging & Storage: 
RANSAPP-AL is packaged in (10.00 Mtr L x 1.00 Mtr W) as per given details:-

Thickness:

• 2MM  (1Mx10M), Weight  2.8 Kg-3.0 Kg
• 3MM  (1Mx1M), Weight  3.8 Kg-4.0 Kg
• 4MM  (1Mx10M), Weight  4.8 Kg-5.0 Kg

Store in a clean dry area protected from direct sunlight and extreme heat and cold.Unopened condition rolls can be stored for 12 months. Use oldest material first.