Brand | Rans |
Color | White |
Packaging Size | 20 kgs,5 kgs,1 kgs,1/2 kgs |
Service Temperature | +15 to +45 Degree C |
Shelf Life | 12 months when stored in tightly sealed containers below 35 Degree C |
Pot Life | 45 - 50 Mints at 35 Degree C of mix |
Curing | Completely cured at room temp. min 12hrs |
Texture | Smooth |
Product Code | RECPL-306 |
To overcome leakage problems, many conventional methods are prevailing in the market, but these treatments have not proved to be result oriented due to which waterproofing still remains a “Pressing” problem
RANSPOXY-PMR250, an improved grade of Water based Epoxy, High solids two components Epoxy based [i.e. Resin & Hardener] air drying systems, specially formulated for various applications.
Properties/Advantages- It is chemically cures at 300 And no additional curing method is required.
- Being Water based Epoxy, it can be applied on Damp surfaces unlike pure Epoxy resins.
- It is odorless, non-flammable, non-toxic enhance it can even be applied in potable water Tanks.
Recommended Uses:
RANSPOXY-PMR250 is used as a primer coat on the following structures:
- RCC, PCC, CC & Metallic Subtracts.
- Highly need for STP Tanks, Ph. Value works.
How To Use:
For better adhesion, it is essential to clean the surface on which the material is to be consumed. To remove dust, dirt, or loose particles by emery paper, wire brush. To get optimum performance the surface must be dry, free from oil grease and later sufficiently washed with ample of water. For concrete surface, old concrete surface should be examined for structural soundness. Unsound areas must be repaired.
Precaution:
Mix only the required quantity of RANSPOXY-PMR250 and RANSPOXY-SLF, which can be utilize within stipulated pot-life period to avoid solidification. Wash all tools and tackles with ample of water immediately after application is completed.
Storage:
Material should be stored in an enclosed area and away from direct sunlight and heat.