Rans Engineering & Chemicals Private Limited

RANSPOXY-TGS is a high-performance epoxy-based tile grout system designed for long-lasting joint filling between tiles, stones, and marbles. It provides excellent chemical resistance, stain protection, and waterproof sealing, ensuring a smooth and hygienic finish even in harsh environments.Key Features:High-strength epoxy formulation for superior durabilityStain-free and easy-to-clean glossy surfaceExcellent resistance to water, oil, acids, and household chemicalsPrevents bacterial and fungal growthSuitable for both interior and exterior applicationsAreas of Application:Bathrooms, kitchens, and swimming poolsIndustrial floors and chemical plantsHospitals, laboratories, and clean roomsCommercial complexes and decorative tile jointsAvailable Shades:Wide range of aesthetic colors to match tiles and interiors.Packaging:Available in 1 kg and 5 kg composite packs.

We are providing Ransthane-PMR Single Pack Special Polymerized Primer for PU Coating.
We are counted amongst the known Manufacturer, Wholesaler, Trader, Service Provider, Supplier of Liquid Waterproofing Membranes, Bituminous Waterproofing Membrane etc. We offer these products at most affordable prices.

RANS® Epoxy Bonding Agent is a two-component, solvent-free epoxy resin system specially designed for bonding new concrete to old concrete, steel, and other construction surfaces. It provides excellent adhesion, chemical resistance, and long working time, ensuring a durable bond in structural and repair works.Uses:Ideal for repairing RCC structures, bonding overlays, primer for epoxy flooring, anchoring bolts, and waterproof coatings.Features:High bond strength with concrete & steelExcellent chemical and water resistanceEasy brush applicationSuitable for vertical and horizontal surfacesPack Size: 1 kg, 3 kg, 5 kg composite kitsMix Ratio: 2 : 1 (Resin : Hardener)Coverage: 4–5 m²/kg depending on surface

To overcome leakage problems, many conventional methods are prevailing in the market, but these treatments have not proved to be result oriented due to which waterproofing still remains a “Pressing” problem RANSPOXY-PMR250, an improved grade of Water based Epoxy, High solids two components Epoxy based [i.e. Resin & Hardener] air drying systems, specially formulated for various applications.

Properties/Advantages

• It is chemically cures at 300 And no additional curing method is required.
• Being Water based Epoxy, it can be applied on Damp surfaces unlike pure Epoxy resins.
• It is odorless, non-flammable, non-toxic enhance it can even be applied in potable water Tanks.

Recommended Uses: 
RANSPOXY-PMR250 is used as a primer coat on the following structures: 

• RCC, PCC, CC & Metallic Subtracts.
• Highly need for STP Tanks, Ph. Value works.

How To Use: 
For better adhesion, it is essential to clean the surface on which the material is to be consumed. To remove dust, dirt, or loose particles by emery paper, wire brush. To get optimum performance the surface must be dry, free from oil grease and later sufficiently washed with ample of water. For concrete surface, old concrete surface should be examined for structural soundness. Unsound areas must be repaired.

Precaution: 
Mix only the required quantity of RANSPOXY-PMR250 and RANSPOXY-SLF, which can be utilize within stipulated pot-life period to avoid solidification. Wash all tools and tackles with ample of water immediately after application is completed.

Storage: 
Material should be stored in an enclosed area and away from direct sunlight and heat.